Increasing economic demands in the field of additive manufacturing (dispensing) have intensified the need for precise, process-sure, and flexible system engineering.
The DATRON PRO 500 dispensing machine was specially developed for industrial adhesive, sealing, or EMC applications and has earned customer confidence by delivering outstanding performance and high-volume consistency. DATRON’s constant-volume dispensing systems are the gold standard in the field of industrial dispensing for small and medium-sized components.
The DATRON PRO 500 dispensing machine provides the highest possible process security and flexibility with a combination of electronic dispensing heads and patented control software. The exchangeable dispensing heads can apply a wide variety of dispensing materials and adhesives. The use of special software technology allows for speed-independent dispensing, resulting in higher dispensing speeds and shorter cycle times. This system works independently of pressure and viscosity, so process parameters don’t need to be adjusted due to modified manufacturing conditions. Combine the PRO500 with the DATRON accessories developed for dispensing tasks, and you have a single source dispensing solution that guarantees optimum quality for your manufacturing.
DATRON dispensing machines were designed to work with well with materials used in fuel cell production and are ideally suited for making the end plates on bipolar plates.
Eliminate the Drip! The DATRON PRO 500 shuts flow at the tip of the needle so there is no drip. You can control your start and stop points and volume with an incredibly high level of accuracy – especially at the knit points.
The modular setup of all dispensing components ensures a high degree of flexibility for your additive manufacturing process. DATRON accessories like the module clamping systems or CAD/CAM software will drastically reduce setup times and increase productivity. The automatic nozzle compensation and the XYZ sensor provide high process reliability and repeatability when dispensing critical components. Applications include:
|Machining Table||Portal set-up with dual Y-drive on anodized Aluminum table|
|Traverse Path||520 x 650 x 240 mm (20.47″ x 25.59″ x 9.45″) (X x Y x Z)|
|Portal Height||200 mm (7.87″)|
|Dispensing/ Positioning Speed||up to 16 m/min (629.92 in/min) per axis |
up to 20 m/min (787.40 in/min) traversing
|Control System||Decentral, digital servo control with interface.|
|Material||Lower and highly viscous, unfilled and abrasive, as well as heatable. (depending on Dispensing Head)|
|Material Supply||Cartridges, foil packs, pails or barrels.|
|Footprint||1300 x 1300 x 1950 mm (51.18″ x 51.18″ x 76.77″) (W x D x H)|
|Weight||approx. 560 kg (1235 lbs)|
Our DATRON experts help many customers bring manufacturing in-house. Reach out to our team to see which machine and accessories are the right fit for your parts.