fb pixel
CNC Milling Tools

888-262-2833

Customer Service

FREE SHIPPING

U.S. Orders*

Dovetail Milling Tool

The dovetail milling tool is a chamfering tool that can create a bevel or relief on the underside of your stock material. For example, if you have a flat piece of aluminum secured on a vacuum table, you can deburr the underside using this tool without flipping the part and doing a second operation.

Unique applications and situations often require very specific and special tools. We have developed a line of cutters to meet the requirements. These long-life, micro-grain carbide tools are available in various cutting diameters and lengths, shank diameters and geometries for the most demanding applications.

DATRON’s unique CNC cutting tools are made with a proprietary process:

  • We use high quality micro-grain carbide to provide superior tool life and long-term savings
  • A multi-stage grinding process delivers extra sharp, polished edges for burr-free machining, reducing or eliminating the need to hand-finish parts
  • Patented tool geometries that decrease cycle times, improve finishes and boost productivity

Check out this video on our tools: https://www.youtube.com/watch?v=56ZsM_h13Vc

 

Article #: See Options Below Category Tag

Dovetail Milling Tool

$59.50

Showing 1 – 1 of 1 results Showing all 1 results Showing the single result No results found
Sort by
Filters Sort results
Reset Apply
Article #
The number of cutting flutes in the tool determine how much material can be removed per rotation. For high speed, bulk material removal, single and double flute are recommended. Higher flutes will produce finer finishes, but may require a lower RPM than single flute mills.
Flutes
D1
Nominal cutting diameter of the tool

Cutting Diameter
D2
Shank diameter where the tool is in contact with the holder. D2 diameter can be too large for some machine spindles and smaller diameters may need an adapter to be used with spindles.

Shank
D3= Toric cut diameter is the relief made above the cutting flutes on the neck to allow a tool to have longer reach when milling deeper features. Also known as extended reach.
(D3)
L1
L1 is the total length of the tool from tip to base.
Length
L2
L2 is the length of the usable cutting edge of the tool. This is only the flutes. Also known as flute length. This determines the amount (depth) of material that can be removed per pass.
Cutting Depth
L3
L3= This is the overall reach a tool can be used. Flute plus any relief made by reducing the diameter in D3. AKA known as reach
Reach
Radius of the cutting tip/nose.
Edge Radius
Angle
A= angle of a cutting edge. Drills, engraving tools and countersink tools aka point angle.
A
Price
Availability
Quantity
Add to cart
0068290
2
3mm
3mm
2mm
40mm
3mm
6mm
$59.50
36 in stock
Max: 36
Min: 1
Step: 1

welcome Back

Access your saved carts. View purchase history and easily reorder tools or complete orders.

Login to your DATRON account

SHARE YOUR CART