fb pixel

Cyber Week Sale On DATRON Tools! Use Code CYBER23 for 15% Off
Complimentary DATRON gift with orders of $1000
For US Customers Only

DATRON logo
CNC Milling Tools

888-262-2833

Customer Service

FREE SHIPPING

U.S. Orders*

Steel Machining – Standard Engraving Tool

The standard engraving tool is ground specifically for engraving steel. The relief angle on the back of the tool is minimal offering better strength and stability. The uncoated carbide cutter can be re-sharpened using a proper cutter grinder. This service is not offer by Datron.

For precision, high-quality engraving, using engraving tools are recommended. The ‘V’ shape design allows you to machine very finite detail while still maintaining a good degree of strength in the tool. The cutting edges have a draft angle depending on the cutter which in most cases is desired for the end product. These solid micro-grain carbide tools are available in various cutting angles, tip sizes, tool lengths and shank diameters.

Article #: See Options Below Category Tags ,

Steel Machining – Standard Engraving Tool

$61.50

Filter Table
Cutting Diameter (D1)
Shank (D2)
Length (L1)
Operations
α
Showing 1 – 5 of 5 results Showing all 5 results Showing the single result No results found
Sort by
Filters Sort results
Reset Apply
Article #
The number of cutting flutes in the tool determine how much material can be removed per rotation. For high speed, bulk material removal, single and double flute are recommended. Higher flutes will produce finer finishes, but may require a lower RPM than single flute mills.
Flutes
D1
Nominal cutting diameter of the tool

Cutting Diameter
D2
Shank diameter where the tool is in contact with the holder. D2 diameter can be too large for some machine spindles and smaller diameters may need an adapter to be used with spindles.

Shank
D3= Toric cut diameter is the relief made above the cutting flutes on the neck to allow a tool to have longer reach when milling deeper features. Also known as extended reach.
(D3)
L1
L1 is the total length of the tool from tip to base.
Length
L2
L2 is the length of the usable cutting edge of the tool. This is only the flutes. Also known as flute length. This determines the amount (depth) of material that can be removed per pass.
Cutting Depth
L3
L3= This is the overall reach a tool can be used. Flute plus any relief made by reducing the diameter in D3. AKA known as reach
Reach
Radius of the cutting tip/nose.
Edge Radius
Angle
A= angle of a cutting edge. Drills, engraving tools and countersink tools aka point angle.
A
Price
Availability
Size
Quantity
Add to cart
Waitlist
0068511
1
0.1mm
6mm
50mm
30°
$61.50
6 in stock
Max: 6
Min: 1
Step: 1
0068512
1
0.1mm
6mm
50mm
40°
$61.50
26 in stock
Max: 26
Min: 1
Step: 1
0068512A
1
0.2mm
6mm
50mm
40°
$61.50
Only 2 left
Max: 2
Min: 1
Step: 1
0068513A
1
0.2mm
6mm
50mm
60°
$61.50
23 in stock
Max: 23
Min: 1
Step: 1
0068514
1
0.1mm
6mm
50mm
90°
$61.50
8 in stock
Max: 8
Min: 1
Step: 1

welcome Back

Access your saved carts. View purchase history and easily reorder tools or complete orders.

Login to your DATRON account

SHARE YOUR CART