Store up to 143 Tools in Your CNC Machine With ToolAssist

by | Feb 6, 2020 | Press Release

Smart. Innovative. Efficient.

Milford, NH, February 2, 2020 – DATRON Dynamics, Inc. announced the launch of a new tool changing system, DATRON ToolAssist. With DATRON ToolAssist, the German milling machine specialists present a tool organization system with an innovative operating concept with an expanded tool capacity.

ToolAssist

For ToolAssist, DATRON focused on process reliability. The external mounting position enables a safe tool change thanks to the monitoring of collets and protects up to 143 tool positions from dirt and chips. At the same time, number of tool positions ensures the possibility of a large variety of tools and the use of sister tools in series production. Thanks to its innovative operating concept via the interactive DATRON next control, DATRON ToolAssist ensures intelligent tool organization and loading/unloading during machine operation.

DATRON ToolAssist Highlights at a glance:

+ Good accessibility thanks to automated side door
+ Possibility of machining panels and other flat components thanks to an extremely generous machining area
+ Up to 143 tool places allow a large variety of tools and the use of sister tools in series production
+ Ergonomic loading and unloading during machine operation
+ Safe tool change by monitoring the collets

DATRON ToolAssist is an integral part of the new DATRON MXCube, but it is also optionally available for DATRON M8Cube and DATRON MLCube milling machines. Learn more about ToolAssist and other machine accessories here

About DATRON

High-Speed CNC machining is more than 60,000 RPM spindle-speed. When you’re making small or complex parts, you need speed and precision at every stage. DATRON AG engineers didn’t just invent a faster, more precise CNC machine. They re-interpreted and optimized your entire machining workflow from start to finish.

About the Author

DATRON Archives

DATRON Twitter Feed

Vacuum workholding that doesn't need a gasket? 🤔
Learn more about how easy and flexible vacuum workholding can be: https://bit.ly/2TFZFFq

#datron #datroncnc #datronneo #datronnext #vacuumclamping #vacuumtable #vacuumchuck #workholding #cnc #instamachinist

Robert Cowan just put our facemill to the test to find the best recipes for aluminum face milling on his AVID CNC. Look at those chips! 😍
Make sure to watch the whole video and follow Robert on YouTube: https://bit.ly/3ib2hFT
Follow Robert on Facebook: https://bit.ly/2CVzGo5

Marking die manufacturing is a perfect fit for any DATRON. The need for micro tools and precision engraving is a perfect match for the spindle speed and dynamic motion of the neo.

Watch the whole video, with all the cutting parameters: https://bit.ly/31mYDCO

The Steep and Shallow toolpath in Fusion360 is perfect for the flowing curves of this generative designed component for Team Valkyrie's BattleBot . Make sure you check out Autodesk Fusion 360 for 50% off subscriptions and the manufacturing extension: https://autode.sk/2B1Q6um

While a garage can be a snug fit for an industrial CNC machine, how about a broom closet? 😁 This neo was chosen for McGill University in Quebec after a long search found nothing else could touch it's capabilities compared to it's footprint. Learn more: https://bit.ly/2VI7oD8

2

Milling polycarbonate comes naturally when using a DATRON - thanks to the combination of optimized tools, high spindle speed, and excellent vacuum workholding. Our customers have leveraged these attributes to great effect over the years, read more: https://bit.ly/2NlAMuX

Have you seen our newest tool change system? ToolAssist is a high-capacity tool changer that allows for capacity of up to 143 tools, as well as loading during operation. It's the perfect companion for production and prototyping jobs alike! Learn more: https://bit.ly/2CoiLdg

2

Work continues on the Valkyrie BattleBot parts! Here we're roughing out a pocket with our 10mm balanced single flute, using parameters from our cutting guide.

Download our comprehensive cutting guide for feeds, speeds, tips: https://bit.ly/35Mg7Hq

#datron #battlebots #cnc

"We’re going to save 50-80% of the cost and the turnaround time will be a couple of hours in-house compared to 10 days when we outsourced the work.” This is the story of Dec-O-Art, a company that optimized their engraving process with DATRON. Read more: https://bit.ly/2AEbBBp

We are super excited to announce that we will be sponsoring Team Valkyrie for the upcoming BattleBot season! We'll be making 5 different parts that we will be sharing along the way. Stay tuned for more updates, and check out Team Valkyrie: https://bit.ly/2AJUpu7 @BattleBots

Load More...

Discover How You Can Revolutionize Your Entire Workflow Today

DATRON machines dramatically reduce practically every aspect of your machining workflow. Download our FREE Workflow Optimization Map and learn how today. 

Pin It on Pinterest