fb pixel
CNC Milling Tools

888-262-2833

Customer Service

FREE SHIPPING

U.S. Orders*

Vacuum Cards

STANDARD
The Vacuum Card serves as a sacrificial layer during machining operations on our DATRON vacuum tables. The engineered structure of the Vacuum Card distributes the vacuum evenly ensuring uniform holding force even when machining into the sacrificial layer by minimizing vacuum losses.

ADHESIVE
Adhesive Vacuum Card is designed for applications where even the smallest parts need to be held reliably. The addition of an adhesive grid provides extra holding force when needed. Just like our standard Vacuum Card it provides a sacrificial layer during machining operations on our DATRON vacuum tables. The adhesive is quickly cleaned up with ethanol.

For Bulk Orders, please call 603-215-5890.

*Oversized shipping required, Flat rate of $35/per bundle.

Article #: See Options Below Category

Vacuum Cards

$136.00$198.00

Showing 1 – 3 of 3 results Showing all 3 results Showing the single result No results found
Sort by
Filters Sort results
Reset Apply
Article #
The number of cutting flutes in the tool determine how much material can be removed per rotation. For high speed, bulk material removal, single and double flute are recommended. Higher flutes will produce finer finishes, but may require a lower RPM than single flute mills.
Flutes
D1
Nominal cutting diameter of the tool

Cutting Diameter
D2
Shank diameter where the tool is in contact with the holder. D2 diameter can be too large for some machine spindles and smaller diameters may need an adapter to be used with spindles.

Shank
D3= Toric cut diameter is the relief made above the cutting flutes on the neck to allow a tool to have longer reach when milling deeper features. Also known as extended reach.
(D3)
L1
L1 is the total length of the tool from tip to base.
Length
L2
L2 is the length of the usable cutting edge of the tool. This is only the flutes. Also known as flute length. This determines the amount (depth) of material that can be removed per pass.
Cutting Depth
L3
L3= This is the overall reach a tool can be used. Flute plus any relief made by reducing the diameter in D3. AKA known as reach
Reach
Radius of the cutting tip/nose.
Edge Radius
Angle
A= angle of a cutting edge. Drills, engraving tools and countersink tools aka point angle.
A
Price
Availability
Quantity
Add to cart
0A01617K
Standard Vacuum Card 500mm x 400mm x 0.7mm
$136.00
24 in stock
Max: 24
Min: 1
Step: 1
0A01618W
Adhesive Vacuum Card 500mm x 400mm x 0.7mm (5mm x 5mm Grid)
$198.00
21 in stock
Max: 21
Min: 1
Step: 1
DV001002
Standard Vacuum Card 24” x 36” x .023"
$196.00
143 in stock
Max: 143
Min: 1
Step: 1

welcome Back

Access your saved carts. View purchase history and easily reorder tools or complete orders.

Login to your DATRON account

SHARE YOUR CART