fb pixel
CNC Milling Tools

888-262-2833

Customer Service

FREE SHIPPING

U.S. Orders*

Long Reach Triple Flute End Mill

For applications requiring deep pocketing or channels, long-reach tools are designed for these situations. This is achieved by reducing the diameter above the cutting edge allowing clearance between the tool and the wall when machining deeper cuts. These tools are best suited for special circumstances – shorter are recommended for improved performance. The triple fluted tools are ideal for aluminum, brass, copper and wood.

For machining harder materials such as steel at a lower RPM, the triple fluted tool is a good solution. The x.ceed coated end mill offers longer life and resists against abrasion. The tool is balanced and strong, producing minimal vibrations which translates into good surface finishes.

Our triple fluted tools are better suited to material-specific applications where lower RPM and increased core strength may be needed. These long-life, micro-grain carbide tools are available in various cutting diameters and lengths, shank diameters, and geometries for specialty material applications.

Long Reach Triple Flute End Mill

$46.50

Showing 1 – 1 of 1 results Showing all 1 results Showing the single result No results found
Sort by
Filters Sort results
Reset Apply
Article #
The number of cutting flutes in the tool determine how much material can be removed per rotation. For high speed, bulk material removal, single and double flute are recommended. Higher flutes will produce finer finishes, but may require a lower RPM than single flute mills.
Flutes
D1
Nominal cutting diameter of the tool

Cutting Diameter
D2
Shank diameter where the tool is in contact with the holder. D2 diameter can be too large for some machine spindles and smaller diameters may need an adapter to be used with spindles.

Shank
D3= Toric cut diameter is the relief made above the cutting flutes on the neck to allow a tool to have longer reach when milling deeper features. Also known as extended reach.
(D3)
L1
L1 is the total length of the tool from tip to base.
Length
L2
L2 is the length of the usable cutting edge of the tool. This is only the flutes. Also known as flute length. This determines the amount (depth) of material that can be removed per pass.
Cutting Depth
L3
L3= This is the overall reach a tool can be used. Flute plus any relief made by reducing the diameter in D3. AKA known as reach
Reach
Radius of the cutting tip/nose.
Edge Radius
Angle
A= angle of a cutting edge. Drills, engraving tools and countersink tools aka point angle.
A
Price
Availability
Quantity
Add to cart
0068033A
3
3mm
6mm
2.8mm
58mm
8mm
12mm
$46.50
37 in stock
Max: 37
Min: 1
Step: 1

welcome Back

Access your saved carts. View purchase history and easily reorder tools or complete orders.

Login to your DATRON account

SHARE YOUR CART