fb pixel
CNC Milling Tools

888-262-2833

Customer Service

FREE SHIPPING

U.S. Orders*

Long Reach Double Flute End Mill

For applications requiring deep pocketing or channels, long-reach tools are designed for these situations. This is achieved by reducing the diameter above the cutting edge allowing clearance between the tool and the wall when machining deeper cuts. These tools are best suited for special circumstances – shorter are recommended for improved performance. These tools are ideal for aluminum, brass, plastics, exotic composites and any hard metals.

Our double flute tools are ideal for machining when surface finishes are important. They are typically used for finishing pockets and making lighter cuts. Also, they can be used in applications with tiny diameters because the double flute is stronger compared to a single fluted tool. These long-life, micro-grain carbide tools are available in various cutting diameters and lengths, shank diameters, and geometries for specialty applications.

DATRON’s unique CNC cutting tools are made with a proprietary process:

  • We use high quality micro-grain carbide to provide superior tool life and long-term savings
  • A multi-stage grinding process delivers extra sharp, polished edges for burr-free machining, reducing or eliminating the need to hand-finish parts
  • Patented tool geometries that decrease cycle times, improve finishes and boost productivity

Check out this video on our tools: https://www.youtube.com/watch?v=56ZsM_h13Vc

Article #: See Options Below Category Tag

Long Reach Double Flute End Mill

$65.00$71.00

Showing 1 – 6 of 6 results Showing all 6 results Showing the single result No results found
Sort by
Filters Sort results
Reset Apply
Article #
The number of cutting flutes in the tool determine how much material can be removed per rotation. For high speed, bulk material removal, single and double flute are recommended. Higher flutes will produce finer finishes, but may require a lower RPM than single flute mills.
Flutes
D1
Nominal cutting diameter of the tool

Cutting Diameter
D2
Shank diameter where the tool is in contact with the holder. D2 diameter can be too large for some machine spindles and smaller diameters may need an adapter to be used with spindles.

Shank
D3= Toric cut diameter is the relief made above the cutting flutes on the neck to allow a tool to have longer reach when milling deeper features. Also known as extended reach.
(D3)
L1
L1 is the total length of the tool from tip to base.
Length
L2
L2 is the length of the usable cutting edge of the tool. This is only the flutes. Also known as flute length. This determines the amount (depth) of material that can be removed per pass.
Cutting Depth
L3
L3= This is the overall reach a tool can be used. Flute plus any relief made by reducing the diameter in D3. AKA known as reach
Reach
Radius of the cutting tip/nose.
Edge Radius
Angle
A= angle of a cutting edge. Drills, engraving tools and countersink tools aka point angle.
A
Price
Availability
Quantity
Add to cart
00781005
2
0.5mm
3mm
0.45mm
40mm
0.75mm
4mm
$65.00
22 in stock
Max: 22
Min: 1
Step: 1
00781007
2
0.7mm
3mm
0.65mm
38mm
1.05mm
4mm
$65.00
13 in stock
Max: 13
Min: 1
Step: 1
00781010
2
1mm
3mm
0.95mm
38mm
1.5mm
6mm
$71.00
9 in stock
Max: 9
Min: 1
Step: 1
00781011
2
1mm
3mm
0.95mm
38mm
1.5mm
9mm
$71.00
12 in stock
Max: 12
Min: 1
Step: 1
00781015
2
1.5mm
3mm
1.45mm
38mm
2.2mm
9mm
$71.00
53 in stock
Max: 53
Min: 1
Step: 1
00781020
2
2mm
3mm
1.95mm
38mm
3mm
12mm
$71.00
24 in stock
Max: 24
Min: 1
Step: 1

welcome Back

Access your saved carts. View purchase history and easily reorder tools or complete orders.

Login to your DATRON account

SHARE YOUR CART