fb pixel
CNC Milling Tools

888-262-2833

Customer Service

FREE SHIPPING

U.S. Orders*

Double Flute Contour Mill

For the highest quality surface finishes on machined side walls, the double fluted contour milling end mill is ideal. This tool is specially ground for obtaining good quality surfaces and is recommended for materials such as aluminum, brass and plastics. The tool is not designed for high material removal and should be only used for surfacing.

Unique applications and situations often require very specific and special tools. We have developed a line of cutters to meet the requirements. These long-life, micro-grain carbide tools are available in various cutting diameters and lengths, shank diameters and geometries for the most demanding applications.

Article #: See Options Below Category Tags ,

Double Flute Contour Mill

$44.00

Filter Table
Cutting Diameter (D1)
Shank (D2)
Length (L1)
Cutting Depth (L2)
Operations
Showing 1 – 2 of 2 results Showing all 2 results Showing the single result No results found
Sort by
Filters Sort results
Reset Apply
Article #
The number of cutting flutes in the tool determine how much material can be removed per rotation. For high speed, bulk material removal, single and double flute are recommended. Higher flutes will produce finer finishes, but may require a lower RPM than single flute mills.
Flutes
D1
Nominal cutting diameter of the tool

Cutting Diameter
D2
Shank diameter where the tool is in contact with the holder. D2 diameter can be too large for some machine spindles and smaller diameters may need an adapter to be used with spindles.

Shank
D3= Toric cut diameter is the relief made above the cutting flutes on the neck to allow a tool to have longer reach when milling deeper features. Also known as extended reach.
(D3)
L1
L1 is the total length of the tool from tip to base.
Length
L2
L2 is the length of the usable cutting edge of the tool. This is only the flutes. Also known as flute length. This determines the amount (depth) of material that can be removed per pass.
Cutting Depth
L3
L3= This is the overall reach a tool can be used. Flute plus any relief made by reducing the diameter in D3. AKA known as reach
Reach
Radius of the cutting tip/nose.
Edge Radius
Angle
A= angle of a cutting edge. Drills, engraving tools and countersink tools aka point angle.
A
Price
Availability
Quantity
Add to cart
0068033
2
3mm
6mm
57mm
8mm
$44.00
7 in stock
Max: 7
Min: 1
Step: 1
0068036
2
6mm
6mm
-
13mm
$44.00
37 in stock
Max: 37
Min: 1
Step: 1

welcome Back

Access your saved carts. View purchase history and easily reorder tools or complete orders.

Login to your DATRON account

SHARE YOUR CART