Do you need cutting tools for high-speed machining?

Tools Made for Speed, Quality, and Longer Life

Machinists and Engineers Are Always Under Pressure to Save Time and Reduce Costs—While Maintaining a High Level of Quality

Using the right tool for the job can increase throughput and improve results.

We are the only German machine builder to design and manufacture our own line of balanced tools for high-speed machining.

Our high-speed carbide tools are made with a proprietary multi-stage process:

  • Ground from Micro-grain carbide for longer life
  • Feature highly polished sharper edges for burr-free machining and superior finishes
  • Patented single flute geometries that decrease cycle times and save money

If you’re machining at 15,000 RPM or above, tools designed specifically for high-speed machining are simply more efficient and cost effective.

Engage with Us and Other DATRON Fans:

CNC Programming for Batch Machining

Today, we’re going to answer a question that we get a lot – how do I program for batch machining? What is Batch Machining? “I need to make identical...

Machining Engineered Plastics and Composites for Electronics

In the 1960’s and ‘70’s Bill Devine, did tours of duty both in Vietnam and working at Excellon selling equipment to printed circuit board (PCB)...

Machining Custom Aluminum Panels

DataPro International Inc. is a leading supplier of panel-mount connectivity solutions ranging from panel-mount cables and couplers to customized...

Optimized for High Speed!

Better quality cut & surface finish

Reduced cycle time

Longer tool life

DATRON Cutting Tools for Your Success!

Single Flute End Mill
Superior chip evacuation for high-volume material removal. The specialty-ground geometry of the single flute end mill is designed for high speed machining and high volume material removal. The large chip room in this single flute results in better chip evacuation which allows for higher feed rates and shorter cycle times. These tools are available with various cutting lengths and shank diameters. Check out all of these variants of the single flute end mill with a wide range of benefits:

  • Polished Single Flute End Mill
  • Balanced Single Flute End Mill
  • 4-in-1 (Wiper Flat) Single Flute End Mill
Monoblock Cutting Tool
For efficient face milling and so much more! The DATRON HSK-E 25-based Monoblock Tool is more than just an amazing face milling tool. The monoblock gives you the flexibility to do face milling, roughing, finishing and contouring. Plus, replaceable carbide cutting inserts are available for a variety of materials.
Acrylic Cutting Tools
Cost-effective acrylic processing with glass-like surface finishes. Until now, there was no alternative to expensive natural or industrial diamond-coated polishing end mills for glossy machining of transparent plastics such as acrylics or plexiglass. DATRON now offers Acrylic Cutting Tools — a cost effective alternative to diamond-tipped polishing end mills. With the new series of polished milling tools, DATRON helps you to achieve highly transparent milling results at a remarkably low cost.
Foam Cutting Tools
An alternative to wire, waterjet and laser processing of PU Foam. The perfect alternative to conventional PU foam machining. DATRON foam mills offer a cost effective, time saving, and most importantly, a rework-free alternative to conventional machining methods such as wire, water jet and laser cutting of polyurethane foams. The new DATRON foam mill series with the specially developed DATRON shank mills and countersinks models achieve uniquely precise results when milling PU foams.
Double Flute End Mill
Available in many variations for a wide range of applications. DATRON double flute end mills are available in special variations – with extra short cutting edge, toric cut, stepped and coated micro-tools with extra short flutes for steel machining.
Multi Flute End Mills
3-, 4-, 6-, 8- & 12-flutes. Whether with three, four, six, eight or twelve cutting edges – all DATRON multi-flute tools are developed for steel machining, have a stable cutting geometry and heavy-duty coatings.
Micro Toothed End Mills
For abrasive materials like composites or engineered plastics. Abrasive materials, such as CRP, GRP or printed circuit board material can be reliably machined at low cost with the micro-toothed end mills from DATRON.
Drills and Thread Mills

We even have a combination tool that drills a hole and threads it too! DATRON tools deliver reliable drilling from a diameter of 0.1 mm and thread milling in a flash from M1.0. Our innovative thread mill performs core hole drilling and thread milling with only one tool … in a single work step.

Radius End Mill
High-quality radius cuts with exceptional edge finish. DATRON radius end mills feature extremely sharp cutting edges for exceptional results on radius cuts with no post processing required.
Engraving and Counter Sink
A wide variety of shank sizes and degrees of tip angle. Engraving, deburring and chamfering. DATRON micro-grain solid carbide engraving tools are available in various shank sizes degrees of tip sharpness. Additionally, they are offered in a balanced model and for steel engraving. Plus, we even spring-mounted cutting diamond for jewelry engraving and suitable for metals.
Dental Milling Tools
For Zirconium Oxide, CrCo, Titanium, Nanocomposite, PMMA or Wax. DATRON offers the optimum milling tools for the dental materials you intend to machine. Thanks to the coatings, specially adapted to the material, the highest surface quality and long tool life are guaranteed.
Tool Coatings
Extend tool life with these specialty coatings. The dependable characteristics of DATRON high-quality tools are further improved with by several unique material coatings. These specialty coatings provide an improved hardness enabling faster feed rates, and a smoother surface finish. In addition, these coatings allow for optimized tool wear and increased continuous production times.
Single Flute End Mill

Superior chip evacuation for high-volume material removal. The specialty-ground geometry of the single flute end mill is designed for high speed machining and high volume material removal. The large chip room in this single flute results in better chip evacuation which allows for higher feed rates and shorter cycle times. These tools are available with various cutting lengths and shank diameters. Check out all of these variants of the single flute end mill with a wide range of benefits:

  • Polished Single Flute End Mill
  • Balanced Single Flute End Mill
  • 4-in-1 (Wiper Flat) Single Flute End Mill
Monoblock Cutting Tool

For efficient face milling and so much more! The DATRON HSK-E 25-based Monoblock Tool is more than just an amazing face milling tool. The monoblock gives you the flexibility to do face milling, roughing, finishing and contouring. Plus, replaceable carbide cutting inserts are available for a variety of materials.
Acrylic Cutting Tools

Cost-effective acrylic processing with glass-like surface finishes. Until now, there was no alternative to expensive natural or industrial diamond-coated polishing end mills for glossy machining of transparent plastics such as acrylics or plexiglass. DATRON now offers Acrylic Cutting Tools — a cost effective alternative to diamond-tipped polishing end mills. With the new series of polished milling tools, DATRON helps you to achieve highly transparent milling results at a remarkably low cost.
Foam Cutting Tools

An alternative to wire, waterjet and laser processing of PU Foam. The perfect alternative to conventional PU foam machining. DATRON foam mills offer a cost effective, time saving, and most importantly, a rework-free alternative to conventional machining methods such as wire, water jet and laser cutting of polyurethane foams. The new DATRON foam mill series with the specially developed DATRON shank mills and countersinks models achieve uniquely precise results when milling PU foams.
Double Flute End Mill

Available in many variations for a wide range of applications. DATRON double flute end mills are available in special variations – with extra short cutting edge, toric cut, stepped and coated micro-tools with extra short flutes for steel machining.
Multi Flute End Mills

3-, 4-, 6-, 8- & 12-flutes. Whether with three, four, six, eight or twelve cutting edges – all DATRON multi-flute tools are developed for steel machining, have a stable cutting geometry and heavy-duty coatings.
Micro Toothed End Mills

For abrasive materials like composites or engineered plastics. Abrasive materials, such as CRP, GRP or printed circuit board material can be reliably machined at low cost with the micro-toothed end mills from DATRON.
Drills and Thread Mills

We even have a combination tool that drills a hole and threads it too!DATRON tools deliver reliable drilling from a diameter of 0.1 mm and thread milling in a flash from M1.0. Our innovative thread mill performs core hole drilling and thread milling with only one tool … in a single work step.
Radius End Mill

High-quality radius cuts with exceptional edge finish. DATRON radius end mills feature extremely sharp cutting edges for exceptional results on radius cuts with no post processing required.
Engraving and Counter Sink

A wide variety of shank sizes and degrees of tip angle. Engraving, deburring and chamfering. DATRON micro-grain solid carbide engraving tools are available in various shank sizes degrees of tip sharpness. Additionally, they are offered in a balanced model and for steel engraving. Plus, we even spring-mounted cutting diamond for jewelry engraving and suitable for metals.
Dental Milling Tools

For Zirconium Oxide, CrCo, Titanium, Nanocomposite, PMMA or Wax. DATRON offers the optimum milling tools for the dental materials you intend to machine. Thanks to the coatings, specially adapted to the material, the highest surface quality and long tool life are guaranteed.
Tool Coatings

Extend tool life with these specialty coatings. The dependable characteristics of DATRON high-quality tools are further improved with by several unique material coatings. These specialty coatings provide an improved hardness enabling faster feed rates, and a smoother surface finish. In addition, these coatings allow for optimized tool wear and increased continuous production times.

The Results

“The [cutting] bits I’ve gotten from DATRON are just out of this world. Value-wise it’s not even a question. The end-product we’re producing is so much better with DATRON tools.”

— Glenn Parent, Site Supervisor, Expographiq

Discover How You Can Revolutionize Your Entire Workflow Today

DATRON machines dramatically reduce practically every aspect of your machining workflow. Download our FREE Workflow Optimization Map and learn how today.