Microsoft R&D Lab Using Datron High Speed Milling Machines For Rapid Prototyping

by | Apr 10, 2015 | Blog

10 min read

Microsoft’s Corporate Vice President, Panos Panay, says, “This is like a big toy factory” when speaking about their R&D operation in Redmond, WA. This state-of-the-art facility, along with the many DATRON high-speed CNC machining centers there, was recently featured by CNN in a piece called “Inside Microsoft’s secret design lab”. Like a kid in a candy store Panay continues, “You can spend days and weeks and build anything on the planet in this building!”

Microsoft R&D lab machining thin aluminum housings using DATRON high speed CNC milling machines.

Microsoft R&D lab using DATRON high speed machining center for milling thin aluminum housings.

Indeed, Microsoft has amassed the world’s leading technology under one roof and the possibilities are endless. Many of the products and devices that we’ve all grown to love and depend on were developed in this building. More importantly the future of commercial electronics will be born here.

Panay is the man behind Microsoft’s Surface, and when commenting on the competitive landscape he says, “You know, we have a very deep set of competitors right now. We’re not sitting on our heels, we need to go forward every day. We can’t fall behind and the way to do it is you build a product, you test. If it fails you build it again. This is awesome right? You learn right away. Iterate, every hour or couple of hours, you can put something in overnight … you can find success and boom! Right there, you’ve failed and succeeded in almost the same set of 8 hours and now you have a solution that works for your customers.”

This is perhaps, the truest spirit of Microsoft R&D, and the equipment in their lab is akin to an artist’s paintbrush, allowing them to embody and emote this spirit in an efficient and meaningful way that can impact the daily lives of millions of consumers. Commenting on rapid prototyping, Panay says, “It happens quickly and it happens in a way that you get the true feel of the product. That’s so important. To really know what your customers are going to use and love you have to feel it.”

DATRON is proud to have consulted with this Microsoft R&D lab regarding the best suited high speed milling equipment for this type of rapid prototyping. What can be seen in the video, is a lineup of DATRON M8 and M8Cube high-speed CNC milling machines that are particularly efficient in milling aluminum parts with superior surface and edge finishes. The quality of surface and edge finish is of paramount importance when evaluating attributes like “feel” discussed by Panay in the video.

Microsoft R&D lab in Redmond, WA using DATRON high speed CNC milling machines for the rapid prototyping of consumer electronics parts including these aluminum housings for Surface3.

Microsoft R&D Lab rapid prototyping aluminum housings for Surface 3.

Bloomberg broadcasted a different video last year of the Microsoft R&D lab that was titled “Inside Microsoft’s Secret Surface Labs”. In this video, the narrator refers to the DATRON M8 as a “magnesium slicing milling machine” and Panay, who appears in this video as well points out, “You’re starting to see that same billet back there come to life right here … and this is our model shop.” The “Surface” story in this video is very much about the tenacity of Microsoft R&D. In fact, it suggests that the initial launch of the Surface in 2012 was less than successful and that iterations of the design have resulted in the product quietly gaining ground.

Brett Ostrum, Surface Development General Manager at Microsoft says, “Thinner and lighter, thinner and lighter, thinner and lighter. Grams, tens of grams are a huge currency for us.” As consumer electronics get smaller, the machines used to develop them have to be able to make tiny parts often featuring thin features, thin walls and other intricate features. This is where DATRON high speed machining centers excel because they were engineered from the ground up around a high speed spindle and for the sole purpose of high speed machining.


High-Speed CNC machining is more than 60,000 RPM spindle-speed. When you’re making small or complex parts, you need speed and precision at every stage. DATRON AG engineers didn’t just invent a faster, more precise CNC machine. They re-interpreted and optimized your entire machining workflow from start to finish.

About the Author

DATRON Archives

DATRON Twitter Feed

You've asked (and asked, and asked) and we've listened! We are nearing the final stages of development for our tooling web store! Before it launches later this summer, get familiar with our catalog, especially our killer line of stepped single flutes:

There's lots of ways to mill a hole, and there's a lot of ways to thread a hole, but there is not a lot of ways to do both at the same time. Check out our Milling Thread Mill, which can mill and thread at once. Learn more about our threading tools:

Vacuum workholding can be a complete game-changer when it comes to batch machining production jobs. Cut down on the setup time, and just get to making chips. Learn more about vacuum workholding:

#datron #datroncnc #vacuumtable #vacuumchuck #cncmachining

Happy 4th of July from all of us at DATRON Dynamics, Inc.

#4thofjuly #happy4th #independenceday2020 #burgers #hotdogs #murrica #fireworks #datron #datroncnc


RED... WHITE... and BLUE! Now that we're done milling these America Flags, we should probably start the grill. Happy 4th of July from all of us at DATRON Dynamics, Inc

#4thofjuly #happy4th #independenceday #burgers #hotdogs #murrica #datron #datroncnc #americanflag #aluminumflag


3D Servisas is always crushing it on their neo with awesome parts like these for electric skateboards. Learn more about the machine that they made their parts on:

#datronneo #datroncnc #datronnext #machining #esk8 #cnc #technology #highspeedmachining

The Valkyrie BattleBot parts are coming along nicely! We used a 6mm single flute ball mill to perform semi-finish and finishing operations on the beautiful curved surfaces. What do you think of the results?
To check out our tools, download our catalog:

Vacuum workholding that doesn't need a gasket? 🤔
Learn more about how easy and flexible vacuum workholding can be:

#datron #datroncnc #datronneo #datronnext #vacuumclamping #vacuumtable #vacuumchuck #workholding #cnc #instamachinist

Robert Cowan just put our facemill to the test to find the best recipes for aluminum face milling on his AVID CNC. Look at those chips! 😍
Make sure to watch the whole video and follow Robert on YouTube:
Follow Robert on Facebook:

Marking die manufacturing is a perfect fit for any DATRON. The need for micro tools and precision engraving is a perfect match for the spindle speed and dynamic motion of the neo.

Watch the whole video, with all the cutting parameters:

Load More...

Discover How You Can Revolutionize Your Entire Workflow Today

DATRON machines dramatically reduce practically every aspect of your machining workflow. Download our FREE Workflow Optimization Map and learn how today. 

Pin It on Pinterest