You've asked (and asked, and asked) and we've listened! We are nearing the final stages of development for our tooling web store! Before it launches later this summer, get familiar with our catalog, especially our killer line of stepped single flutes: https://bit.ly/3gH5H1M

There's lots of ways to mill a hole, and there's a lot of ways to thread a hole, but there is not a lot of ways to do both at the same time. Check out our Milling Thread Mill, which can mill and thread at once. Learn more about our threading tools: https://bit.ly/38AsaKQ

Vacuum workholding can be a complete game-changer when it comes to batch machining production jobs. Cut down on the setup time, and just get to making chips. Learn more about vacuum workholding: https://bit.ly/2TFZFFq

#datron #datroncnc #vacuumtable #vacuumchuck #cncmachining

Happy 4th of July from all of us at DATRON Dynamics, Inc.

#4thofjuly #happy4th #independenceday2020 #burgers #hotdogs #murrica #fireworks #datron #datroncnc

RED... WHITE... and BLUE! Now that we're done milling these America Flags, we should probably start the grill. Happy 4th of July from all of us at DATRON Dynamics, Inc

#4thofjuly #happy4th #independenceday #burgers #hotdogs #murrica #datron #datroncnc #americanflag #aluminumflag

3D Servisas is always crushing it on their neo with awesome parts like these for electric skateboards. Learn more about the machine that they made their parts on: https://bit.ly/3ioTgJD

#datronneo #datroncnc #datronnext #machining #esk8 #cnc #technology #highspeedmachining

The Valkyrie BattleBot parts are coming along nicely! We used a 6mm single flute ball mill to perform semi-finish and finishing operations on the beautiful curved surfaces. What do you think of the results?
To check out our tools, download our catalog: https://bit.ly/35Mg7Hq

Vacuum workholding that doesn't need a gasket? 🤔
Learn more about how easy and flexible vacuum workholding can be: https://bit.ly/2TFZFFq

#datron #datroncnc #datronneo #datronnext #vacuumclamping #vacuumtable #vacuumchuck #workholding #cnc #instamachinist

Robert Cowan just put our facemill to the test to find the best recipes for aluminum face milling on his AVID CNC. Look at those chips! 😍
Make sure to watch the whole video and follow Robert on YouTube: https://bit.ly/3ib2hFT
Follow Robert on Facebook: https://bit.ly/2CVzGo5

Marking die manufacturing is a perfect fit for any DATRON. The need for micro tools and precision engraving is a perfect match for the spindle speed and dynamic motion of the neo.

Watch the whole video, with all the cutting parameters: https://bit.ly/31mYDCO