End Mills

Single Flute End Mills
1/8”, 3, 6, 8 mm, 30°

This specially-cut end mill is designed for very fast feed rates and very high chip removal capacity.

SC micrograin end mill K30/K40 with single flute and flat bottom
30° upcut spiral
shank without clamping surface DIN 6535-HA

Double Flute End Mills
1/8”, 3 mm, 30°

Compared to tools of a standard flute length, the tools with a specially short flute
(Article Nos “K”) are much more robust and have a longer tool life.

SC micrograin end mill K30/K40 with double flute and flat bottom
30° upcut spiral
shank without clamping surface DIN 6535-HA

Double Flute End Mills
6, 8 mm, 30°

The tools with Art. No. 0068442 and 0068443 have a corner radius of 0,5 mm which will result in an optimum finishing cut.

SC micrograin end mill K30/K40 with double flute and flat bottom
30° upcut spiral
shank without clamping surface DIN 6535-HA

Double Flute End Mills
HSC+, 15°

The special feature of this mill is the steep upcutangle. The chips are removed very quickly from the work piece. In many cases this results in extremelyhigh feed rates.

SC micrograin end mill K30/K40with double flute and flat bottom
15° upcut spiral
shank without clamping surface DIN 6535-HA

Triple Flute End Mills 30°

This SC end mill has a very short flute length and a special coating, which results in a very long tool life.

SC micrograin end mill K30/K40 with triple flute
30° upcut spiral
shank without clamping surface DIN 6535-HA centre cut

Four Flute End Mills 30°

This SC end mill has a very short flute length and a special coating, which results in a very long tool life.

SC micrograin end mill K30/K40 with four flutes
30° upcut spiral
shank without clamping surface DIN 6535-HA centre cut

Four Flute End Mills 52°

This SC end mill has a very short flute length and a special coating, which results in a very long tool life.

SC micrograin end mill K30/K40with four flutes
52° upcut spiral
special chip space cavities radial under cut shank with clamping surface DIN 6535-HB
centre cut