The Datron suction unit (SAS) <shown above> can be used to dispose of the chips and dust produced during machining. A brush around the milling cutter prevents chips and dust from escaping the suction area of the suction unit. The hoses have been attached in such a way that they do not obstruct machine movements and cannot be bent.

Applications:

• Graphite machining
• Plastic machining
• Machining Ceramics

Includes:

• Suction head
• Basic module for the brush
• Brush
• Suction hose, diameter 36 mm
• Cabinet wall lead-through

Options:

• Vaccum cleaner
• Spray nozzle holding ring

Accessories:

• Spare brush

Spray nozzle holding ring for suction unit (SAS-SH) <shown to the right>

As an alternative to the brush head (when it is not being used), the spray nozzle holding ring can be fastened to the suction unit basic module.

In this way, you can use the DATRON micro-spraying system without having to dismount the suction unit completely. It is not possible to remove chips with the suction unit during the spraying operation.

Applications:

• Graphite machining
• Plastic machining

Includes:

• Suction head
• Basic module for the brush
• Brush
• Suction hose, diameter 36 mm
• Cabinet wall lead-through

Options:

• Vaccum cleaner
• Spray nozzle holding ring for suction unit basic module

Accessories:

• Spare brush

For more information, feel free
to puruse our website or contact us directly at 888.262.2833.