CNC VMC for machining, milling, engraving graphite, EDM
Other equipment manufacturers may tell you that working with graphite is the same as any other substrate. The reality is that processes like redressing graphite ram EDM dies and machining electrodes produces an abrasive dust that can be damaging to CNC machines and reduce their efficiency. That’s why Datron has engineered machine features specifically for your unique application and environment.

The linear guide ways and precision ground ball screws are covered and feature positive airflow as well as an automatic greasing system that forces any debris out of the machines’ working parts. A 60,000 RPM spindle is pressurized to prevent any dust from entering the bearings. The enclosure is designed for optimized airflow and can easily be fitted with a dust collector or your existing dust collection system to keep airborne dust in check. Plus, our products’ compact design, together with the 208V-7 Amps power requirement, allows it to be placed right next to your ram EDM machine.

Here's a Sneak Peak!
Now, this is the machine you need to machine graphite. And we'll give you a few specs below ... but you've got to promise us that you'll go check it out further on the Products Page of our site, or click the PDFs below.

Standard Features:
Massive cast-steel construction
2KW Spindle with 5/16" collet
60,000 RPM (up to 375"/min.)
Compact 48” x 62” footprint
Dust-protected ballscrews & ways
Work area = 20” x 20” x 7.8”
Ultra-low tool vibration and run-out
Tool Changer 9 tools
Automatic tool-length measurement
Windows®-based operating software
Interfaces with any CAD/CAM package
Digital-servo controlled
Look-ahead buffer
Smoothing (NURBS technology)
Milling graphite with best quality for less cost than Roku Roku
For additional information contact Datron Dynamics directly at 1.888.262.2833.
Milling Graphite is and application sometimes performed with Datron high speed milling machines featuring the graphite vortex and dust extraction system
/* ' ); var aoAccountId = '6438'; var aoCookieMode = 'STANDARD'; var aoCookieDomain = ''; var aoServerContext = '';; /* ]]> */