Dust Extraction suction unit with brush for dust-free CNC Machining.

The CNC Dust Extraction Home Page. For clean chip-free and dust-free CNC machining.

CNC Automation Brochure Download   CNC Automation Video   CNC Automation Questions

 

Dust Extraction system for dust-free CNC Machining
Applications:
Graphite machining
Plastic machining
Machining Ceramics

Includes:
Suction head
Basic module for the brush
Brush
Suction hose, diameter 36 mm
Cabinet wall lead-through

Options:
Vaccum cleaner
Spray nozzle holding ring

Accessories:
Spare brush
Holding Ring to replace brush when brush for dust-free CNC machining is not being used.

Spray nozzle holding ring for suction unit (SAS-SH) <shown to the right>

As an alternative to the brush head (when it is not being used), the spray nozzle holding ring can be fastened to the suction unit basic module.

In this way, you can use the DATRON micro-spraying system without having to dismount the suction unit completely. It is not possible to remove chips with the suction unit during the spraying operation.

Applications:
Graphite machining
Plastic machining

Includes:
Suction head
Basic module for the brush
Brush
Suction hose, diameter 36 mm
Cabinet wall lead-through

Options:
Vaccum cleaner
Spray nozzle holding ring for suction unit basic module

Accessories:
Spare brush

For more information, feel free
to puruse our website or contact us directly at
888.262.2833.

The Datron suction unit (SAS) <shown above> can be used to dispose of the chips and dust produced during machining. A brush around the milling cutter prevents chips and dust from escaping the suction area of the suction unit.
/* ' ); var aoAccountId = '6438'; var aoCookieMode = 'STANDARD'; var aoCookieDomain = 'datron.com'; var aoServerContext = 'http://marketing.datron.com/acton';; /* ]]> */