Th M8 is a workhoarse within the electronics industry and is used for machining Aluminum Enclosures, Custom Enclosures, Plastic Electrical Enclosures, Extruded Aluminum Enclosures and more.

Machining aluminum housing, electronics housing, extruded aluminum housing, electronic housing or aluminum housings with high speed!

For the milling of aluminum housing, aluminum housings, extruded aluminum housing, electronics housing, electronic housing, aluminium housing, aluminum housing with ultra high speed – DATRON High-Speed CNC Machining Centers are the ideal choice.

Aluminum Housing Milling Machine Brochure Download   Aluminum Housing Milling Video   Aluminum Housing Milling Questions
The surface finish of this Aluminum Enclosure is yielded by both high speed machining and a superior spray-mist coolant that simply evaporates leaving parts clean and eliminating the need to de-grease electronics enclosures and other electonics parts.

 

 

Pneumatic Clamping holds this Aluminum Electronic Enclosure during machining. Spray-mist coolant is sprayed where the cutting edge hits the aluminum enclosure and evaporates quickly to leave a clean finished part.

 

Machining Electronics Housings:

Aluminum electrical housings are poduced quickly with DATRON high-speed milling machines. Physically, no material is better suited for the production of electronics housing, electronic housing and custom housings than aluninum. And no machine is better suited for machining aluminum housings than DATRON high-speed machining centers, milling and engraving machines.

Benefits for Housing Machining:
Up to 60,000 RPM Spindle
Coolant Evaporates!
Integrated Clamping & Workholding
Automatic Tool Changer
Easy, Fast Programming
Microsoft Windows-based Control

 

Video of Electronic Housing Machining will load (approx. 60 sec.).
Machining Extruded Aluminum Enclosures for Aluminum Extrusions is accomodated by the large beds and machining area of DATRON Models like the ML-1500
Plastic Electrical Enclosure machined from molded plastic to make a custom enclosure for electronics.

 

Housing Applications:
Electronics Housings
Aluminum Housings
Electronic Housing
Plastic Electrical Housing
Custom Housings
Extruded Aluminum Housing

Milling Plastic Electronics Housing:

Milling or Machining Plastic Electronic Housings can be similar to machining Aluminum Housings in that sharp tools are more beneficial than very hard-edged tools. That said, for plastic electronic housing or electronics housing being machined or milled from fiber reinforced plastics that contain glass or ceramics, carbide tools or hardened steel tools are required.

Feeds & Speeds for Machining Plastic Electronics Housing: This is where the true benefit of Datron high-speed machining centers comes in. Machining plastic electronic housing really requires high speed. Slower spindle speeds allow heat to build up and melt the plastic electronics housing rather than cutting it. Higher spindle speeds throw chips out of the cutting channel and prevent long chips from bird-nesting around the tool and melting to it. High feeds get you from one place to another quickly without leaving the tool in one vicinity for too long heating the material up. But, since small tooling is often required for the small plastic electronic housings, you can’t have high feeds without high spindle speed because it will result in unaccepatable tool breakage. Moral of the story is that if you’re machining plastic electronic housing, you need a Datron.

Surface finish for Plastic Electrical Enclosures is achieved with Datron Technology and know how.

 

5-Axis capability makes eben the most complex or custom electronics enclosure a project well within your electronics enclosure machining capability.

Datron offers an automated, 5-axis, high-speed machining center designed for small part manufacturing. The 5-axis M8Cube is the only machine in this price range that provides 5-axis capabilities for producing small parts requiring tight tolerance. Competitive machines either don’t have a 5-axis option or are very expensive. This 5-axis Trunnion Machining Center can access five sides of a part, and complete the part in a single set-up. It is ideal for producing medical components, aerospace parts and electro-mechanical parts. In conjunction with 5-axis capabilities, Datron also offers a robotic interface and a pick and place system for automated manufacturing.

For machining extruded aluminum housing, we have models with large beds to handle long extrusions making DATRON the ideal choice for milling extruded aluminum housing.

 

Aluminum, Plastic or Custom housing? 888.262.2833

 

Aluminum housing machining and electronics housing milling is often performed on Datron High Speed CNC Milling Machines featuring up to 60,000 RPM spindles

The DATRON M8 High-Speed Machining Center is ideal for milling Electronics Housings from Aluminum and Plastics. It features a 60,000 RPM Spindle and a spray-mist coolant that evaporates after machining leaving a clean electronic housing.

/* ' ); var aoAccountId = '6438'; var aoCookieMode = 'STANDARD'; var aoCookieDomain = 'datron.com'; var aoServerContext = 'http://marketing.datron.com/acton'; /* ]]> */